Crack Repair and Concrete Cement Resurfacing - Surfacing

Call us for your surfacing concrete resurfacing job at 519-588-1970 - we serve Kitchener Waterloo Cambridge Guelph London Woodstock
Toronto and all areas in between- porches-porch step-steps-patio-patios-garage apron or aprons-full garages-concrete stairs-concrete walls
-You name it-no job to small or big

Contact us for your personalized service- we will come out and inspect your concrete cement situation, give you a free written quotation
and start planning for your concrete resurfacing -cement surfacing-foundation repair or crack repair with the correct solution. 519-588-1970

We specialize in this type of work!

Some of what we use and can do:

• Foundation Crack repair and injection for waterproofing -do you have a leaky or wet basement ?
  

• Exterior, Cementitious Concrete Resurfacers
  Our resurfacers are one-component, polymer-modified cementitious materials for the
  resurfacing of existing concrete. They are suitable for broom finishes
  and decorative trowel finishes on sidewalks, driveways, steps and
  anywhere that has exposed concrete. Each product features a natural
  light gray color that provides a uniform, like-new look to concrete
  surfaces. Cures to a very high strength.
  
  
  
• All-Climate, Flexible Cementitious Membrane for Concrete
  Waterproofing and Protection
  We use a cementitious membrane that waterproofs concrete.
  It also protects concrete from chemical attack by de-icing salts,
  sulphates, chlorides and carbon dioxide that leads to deterioration
  and requires costly repair. It is designed for application
  on new concrete structures, concrete structures repaired with
  our specialized mortars and renders with hairline cracks,
  as well as any cementitious surface subject to vibrations and
  subsequent cracking. Use include hydraulic projects as
  channels and faces of dams in addition to swimming pools, basins,
  storage tanks, balconies and terraces.
• Flowable Two-Component Repair Mortar
  This mortar is a two-component, shrinkage-compensated,
  cementitious, flowable structural repair mortar with corrosion
  inhibitor. It is used for renovating and resurfacing interior-exterior
  concrete structures such as galleries, tunnels, bridges, overpasses,
  retaining walls, beams, building facades and ceilings, and residential
  applications for decks, driveways and walkways.
  It also is used for treating concrete surface blemishes
  and defects; filling honeycombs, voids and cavities; and protecting
  concrete against pollutants and acid rain. Once mixed, the mortar
  applies easily onto horizontal surfaces in thicknesses of 1/4" to 1"
  (6 mm to 2,5 cm) per coat. It contains a high concentration
  of synthetic polymer, which produces a repair and surfacing mortar
  that has excellent adhesion, flexural and compression strengths,
  water resistance and freeze/thaw resistance. It is flowable
  and pourable on slabs, allowing it to fill hard-to-reach spaces.
  
  
  
• Fast-Setting Horizontal, Vertical and Overhead
  One-Component Repair Mortar
  This is a one-component, shrinkage-compensated, fastsetting,
  polymer-modified, high-build cementitious repair mortar
  with a corrosion inhibitor. It is suited for all interior/exterior vertical,
  overhead and horizontal concrete applications, including precast/
  prestressed, tilt-up, post-tensioned and cast-in-place concrete.
  It can be applied in thicknesses of featheredge to 4" (0 to
  10 cm) per lift. It is engineered with the manufacturers Easy Glide
  Technology™ for ease of application and is light gray to match
  existing concrete surfaces
  
  
  
• Fast-Setting Mortar
  We can also use a one-component, shrinkage-compensated,
  polymer-modified, cementitious mortar intended for the renovation
  and topping of interior/exterior horizontal concrete surfaces. It is
  designed for factory floor repair, loading docks, warehouse floors
  and other applications where severe wear resistance and abrasion
  resistance are required. We use it for renovation of concrete
  structures such as tunnels, bridges, overpasses, industrial floors,
  warehouse floors, factory floors and loading docks; new and existing
  concrete slabs; and the construction and repair of monolithic
  toppings where fast drying is required.
  When properly mixed, it has a residual moisture
  content of less than 2.5% within 24 hours. Mixed with water,
  it produces a mortar that is easy to apply on horizontal
  surfaces of 1/16" to 1" (1,5 mm to 2,5 cm) for spot patching and up
  to a maximum of 1/4" (6 mm) thick for large areas. It
  achieves an impressive compressive strength of 5,500 psi
  (37,9 MPa) at 28 days or we can use a 2 part system that achieves greater strengths and
  is excellent for heavy-duty industrial applications that include
  manufacturing floors, loading docks and tipping floors for smelting
  metals, where fast drying is required to allow traffic within 3 to 4
  hours. It achieves an impressive compressive strength
  of 6,700 psi (46,2 MPa) in 28 days.
  
  

Call us for your surfacing concrete resurfacing job at 519-588-1970 - we serve Kitchener Waterloo Cambridge Guelph London Woodstock
Toronto and all areas in between- porches-porch step-steps-patio-patios-garage apron or aprons-full garages-concrete stairs-concrete walls
-You name it-no job to small or big

fix wet basement floor - cracked foundation wall - repair cement concrete floor-resurfacing
An OntarioContractors.com Listed Company
April 1, 2012 © All Rights Reseved